High Quality Fail Secure Electric Sturdiness Bolt Lock Time delay

• SL-100A
  N.C. door position detection output
  Power Supply: DC12V
  Without relock function
• SL-100B Door position detection and bolt
  position (N.C. & N.O.) output points
  Power Supply: DC12V
  Without relock function
• SL-100U
  Door position detection and bolt
  position (N.C. & N.O.) output points
  Power Supply: DC12~24V
  With relock function
• Note： SL-100 has its own micro-computer control and detection. It is strongly suggested to use its own door open point (N.O. point) to open door and do not turn its power off (N.C. point) to open door.
• SL-120U
• Door position detection and bolt
• position (N.C. & N.O.) output points
• Power Supply: DC12~24V
• Relock function
• ※ Example：SL-120B has door position detection and bolt position (N.C. & N.O.) output points. Please note that this electric lock has an oval cylinder and its width is 5.8cm. Therefore, the best position to install is at the center of the door leaf (not door frame). Please refer to installation diagram.
• SL-130A
  N.C. door position detection output
  Power Supply: DC12V
• SL-130U
  Door position detection and bolt
  position (N.C. & N.O.) output points
  Power Supply: DC12~24V
• Please note that this electric lock has an oval cylinder and its width is 5.8cm. Therefore, the best position to install is at the center of the door leaf (not door frame). Please refer to installation diagram

Features

• Adjustable fail-safe (power to lock) or fail-secure (power to open).
• Adjustable to fail-secure (power to open) for high security places. Adjustable to fail-safe (power to lock) for public places.
• Built-in door open or door close state detection output point (250mA: N.C./ N.O.).
• Suitable for 180° door.
• Stainless steel bolt is able to sustain more than 800 kg of shear force.
• Adjustable to fail-secure (power to open) to achieve long unlock state function.
• Built-in oval cylinder as unlocking device. Use of oval cylinder to unlock when power cut occurred or during emergency.
• Built-in photo couplers door open push button input contact. Door will lock again automatically when door is not open within 5 seconds.
• Operation temperature: 0~90℃; Humidity: 85%Rh max.
• Dimensions:
  Body: 200mm(L) x 25mm(W) x 38mm(D)
  Strike plate : 90mm(L) x 23mm(W) x 2.5mm(D)
  Bolt : 16mm(Throw) x 12.7mm(Diameter)
• Weight:750g
• Certification: CE